 |
|
Minisprinklers
They've been designed for giving a big range of flow and wed diameters, from 20 cm to 16 mts., offering an efficient irrigation on each growing face and saving water and fertiliser.
Made with lasting plastic materials. Guarantee it's resistance to most of the chemical substances and fertilizers used on fertirrigation , with precision and a long lasting performance without problems.
These irrigation systems offer an extensive range of sophisticated equipment, designed and conceived for satisfying today's agriculture irrigation need for:
- Young and old trees
- Gardens
- Orchards
- Citrus
- Bananas
- Avocado
- Vegetables
- Nurseries and seeds-beds
- Greenhouse
- Parks
- Private gardens
- It's specially effective for frozen and refrigerating systems protection
800 series are simple bridges emissors and have low cost, they have the same construction of bridge and nozzle. With a little change of sprinkler or revolving head, they can work as mini-sprinkler, sprinkler or fogger. They're adaptable for all irrigation applications. For special needs, trunk protectors can be inserted to the emissors for not to wet the tree trunks.
The 800 Minisprinklers irrigates trees with big roots or two trees together on gardens, citrus plantations, bananas, nuts, etc.
Designed for working under 2 atm. work pressure.The 801 Minisprinklers irrigated trees with big roots or two trees together on garden, citrus plantations, avocado (pear), banana, nuts, etc.
Used in greenhouses, nurseries, young plant root, vegetables, etc. for overlap irrigation (2 atm). On wind protected areas. For frozen and refrigerating system protection.
It's been designed for working on a 1,4 atm. pressure, with only one emissor and for 2 atm. for overlap irrigation.803 Minisprinklers it irrigates in an upside down position, after being connected down to a lifted up one on the some plantation. For overlap irrigation an plantations, greenhouse, nurseries, etc. For refrigerating systems in stables and hen houses.
806 Minisprinklers it irrigate a 3 - 5 diameter area with a drizzle with a little of dew. The spray head can be replaced in order to increase the wet diameter when the plant will had grown.
806s Minisprinklers irrigates a small area, from 0,6 to 1 m. The spray head can be replaced to increase the wet diameters when the plant has grown.
807 Minisprinklers is a dynamic gusher, against insect. It irrigates very small areas from 0,2 to 1,4 m. with very big drips. To irrigate holes, palm trees, reduces roots trees, shrub and young plantations.
809 Minisprinklers produces dew of little drops, in a diameter from 0,2 mm aprox. and with an operation pressure of 3 atm. Increasing the pressure and using less water, the drop size can be reduced. This irrigation mechanism keeps constant humidity and creates the right micro-climatic conditions. It's used in greenhouses, young plants, and germination and roots systems.
Nozzle Colour Nozzle Size(mm) L/H G/H Welted diameter at 2 atm 800 801 803 806 807 809 0,8 35 9 5,0 5,5 6,9 2,8 0,2 2,6 1,0 50 13 6,0 6,5 7,2 2,9 0,3 2,8 1,1 60 15 6,5 6,7 7,7 3,3 0,4 3,0 1,2 70 18 7,0 7,1 8,1 3,3 0,5 3,1 1,3 90 24 7,5 7,5 8,4 3,7 0,6 3,2 1,4 105 27 7,7 8,0 8,7 4,1 0,7 3,4 1,5 120 32 8,0 8,2 9,0 4,3 0,8 3,6 1,7 140 36 9,0 9,0 9,5 4,6 1,0 3,7 1,8 160 42 9,5 9,2 9,6 4,8 1,1 - 2,0 200 52 10,0 10,0 9,8 5,3 1,2 - 2,2 240 63 10,0 10,2 10,0 5,4 1,3 -
